Maximum 1/1/1/1 Classification
Superior optical clarity with a 1/1/1/1 classification. This classification evaluates the clarity, light diffusion, shade and angle uniformity of a helmet's lens, ensuring the best visibility and minimal distortion for welders.
The optical class determines how distorted the image is through the lens. The image should be clear and crisp to obtain a 1 rating.
4 Arc Sensors
Detect every arc instantly. The four optimally positioned arc sensors trigger the lens, darkening it and keeping your eyes shielded from the start, even when you’re out of position.
External Grind Button
Seamlessly switch to grind mode with the click of a button. When the helmet is in grind mode a small LED will illuminate, so you don’t need to take the helmet off to check.
4 Point Harness
Get the perfect fit and stay comfortable for hours. Adjust all 4 points of contact to suit you, and have the weight spread more evenly, minimising neck strain.
Respirator-Compatible Design
Engineered to accommodate the Elipse® Half-Mask P2 Respirator, ensuring your lungs stay as protected as your eyes while you weld.
Additional Features
5-13 Shade Control
Keep your eyes protected no matter the weld type. With a 5 to 13 shade range, you’ll be covered while MIG, TIG or STICK welding, no matter if your amps are as low as five or as high as 500.
Backup Battery
A CR2450 backup battery improves the performance and reliability of the auto-darkening filter.
Memory States
Store up to three of your most frequently used shade settings with the memory state buttons, and have your helmet ready to go in an instant.
100x83.4mm View Size
Superior visibility in every situation. The 100x83.4mm viewing area lets you see every weld with complete clarity.
Specifications
Filter Dimensions
114x133x9.5mm
View Size
100x83.4mm
Arc Sensors
4
Classification
1/1/1/1
Light State
4
Dark State
5-13
UV/IR Protection
DIN15
Time from Light to Dark
0.04ms
Time from Dark to Light
0.1-0.9s
Sensitivity Delay
Adjustable (1-5 for Low-High)
Power Supply
Solar Cells & CR2450 Replaceable Battery
Warranty
3 Years
Operating Temperature
-10˚C to 65˚C
Storage Temperature
-20˚C to 85˚C
Shade Control
Yes
Grind Mode
Yes (External)
Minimum TIG Amperage
3A
Standard
AS/NZS 1337.1 B (High Impact)
AS/NZS 1338.1 (Auto-Darkening)
Downloads
Trade Series Helmet Manual
1.85 MB
Welding Helmets Brochure
19.34 MB