Viper 200 TIG L_1
Viper 200 TIG R_1
Viper 200 TIG Front_1
Viper 200 TIG KIT_1
Discontinued Product
Viper 200 TIG L_1
Viper 200 TIG R_1
Viper 200 TIG Front_1
Viper 200 TIG KIT_1


Available in stock


viper-black-logoThe VIPER TIG200P is an inverter-based DC Tig welding machine with HF arc ignition and pulse capability.  Produced using the latest in IGBT technology this low cost and portable machine is reliable, robust and stacked with all the functions you expect from a professional  DC TIG welder.  The HF arc ignition provides pre gas and instant arc ignition with the press of the torch switch leaving no tungsten inclusion and no contamination of the tungsten electrode.  The Down Slope, Post Gas functions combined with the 2/4T trigger function allows you to control the start and finish of the weld process at a professional level. The addition of adjustable pulse frequency 0.2-200Hz gives you the added capability to control the heat input into the work, control penetration and help control distortion. Torch Remote Control Interface provides remote amperage control from the torch in both static and live welding modes. The remote control receptacle provides optional connection of foot control. Combining the functions of the VIPER 200P ensures comprehensive control of the welding parameters when welding all DC weldable materials giving a remarkably smooth arc producing high quality TIG welds. The DC MMA welding capability delivers a smooth and stable arc allowing easy welding with electrodes obtaining high quality welds including cast Iron, stainless and low hydrogen. The VIPER TIG200P is a professional machine that is suitable for multiple applications; stainless steel fabrication, light industrial use, site welding, repair and maintenance applications.
Built to our specification and manufactured in compliance to AS/NZ60974.1

Quick Overview

Part No: KUMJRVT200P

Afforable Performance

The Viper TIG 200DC is an exceptional entry level DC TIG/MMA Welder packed with features suited for light industrial work as well as the DIY market. The machine is 240 volt single phase and is fitted with a 15 amp plug as standard. 

The machine features high frequency ignition for TIG Welding which means you simply place the torch next to the job, press the button on the torch and you are welding. Other features in TIG mode include adjustable post flow gas for cooling your tungsten and Adjustable Down Slope where you can lower your current whilst welding via the touch of a button. 

The machine also features a basic Pulse program for TIG welding allowing you to adjust the Hz of the Pulse Cycle. Pulse is especially beneficial when welding thinner materials allowing for greater control over the (HAZ) Heat Affected Zone and minmising distortion of the parent material. 

The Viper TIG 200DC is also a very capaple MMA (Stick) Welder allowing the operator to weld with electrodes up to 4.00mm in diameter. The machine also features adjustable Arc Force control to again offer another fine tuning adjustment when using different classes of MMA Electrodes. 

*Always refer to the recommended polarity setup as stated on the electrode packaging.



UNIMIG is pleased to offer a 1 year warranty on all Viper machine’s*.
UNIMIG offers warranty across Australia with four UNIMIG service centre’s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well. UNIMIG’s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.

UNIMIG also offers an additional 6 months warranty free of charge when you register your product online via the UNIMIG website.

*Please note warranty only applies to the power source only

Package Contents

The UNIMIG Viper 200P TIG/MMA is packaged ready to weld and includes,

  • 1 x Viper TIG 200 Power Source
  • 1 x 4 metre Arc Welding lead set including twist lock electrode holder & 300 Amp earth clamp
  • 1 x 4 metre SR26 TIG Torch
  • 1 x Argon Bobbin Flowmeter Regulator
  • 1 x Instruction Manual
Viper Kit full crop




  • Part NumberKUMJRVT200P
  • Primary Input Voltage240V 1 Phase
  • Rated Input Power KVA8.0 KVA
  • ieff (Amps)15.0
  • iMax (Amps)34.0
  • Rated Output10-200A/18.0V TIG - 10-160A/27.2V MMA
  • Welding Current Range TIG10 - 200 Amps
  • Welding Current Range MMA10 - 160 Amps
  • No Load Voltage75V
  • Duty Cycle 40 Deg C - TIG DC30% @ 200Amps
  • Duty Cycle 40 Deg C - MMA2520% @ 160mps
  • Protection ClassIP21S
  • Insulation ClassF
  • Dimensions (mm)420 x 160 x 330
  • Weight (Kgs)7.5

Optional extras & accessories