The system is light and easy to operate, It’s performance has no parallel giving the operator 350 amp output with 60% duty cycle 150 mtrs + away from the power source.
RWS WIRE FEEDING UNIT
The RWS is an innovative welding system, developed to solve the problems of welding in critical environments. It is a complete digitally controlled generator for high-performance welding making it possible to weld Pulse MIG, Double Pulse MIG, Synergic MIG, Manual MIG and MMA. For its operation, it can be connected to any suitable DC power source capable of suppling a minimum of 35Vdc up to a maximum of 110Vdc.
The RWS wire feeder whilst only drawing 180Amps from the power source, delivers 350Amps output at a duty cycle of 40% The 500Amp output of the MS 500 generator welder allows for two RWS wire feeders to be connected and operated simultaneously both wire feeders delivering 350Amps @ 40% duty cycle each in both MIG or MMA processes.
The low voltage input minimum of 35Vdc up to a maximum of 110Vdc power supply to RWS wire feeder means that using a 50mm welding cable it is possible to locate the RWS wire feeder at a distance of 150 meters from the DC generator, and all without compromising the welding performance of the system.
The system is powered by low voltage, this gives greater safety to the working environment, making it ideal for working outdoors. or on metal structures such as ship building. The single low voltage input welding cable is a great safety advantage compared to running multiple machines with high voltage input cables. The RWS wire feeder is supplied with a digital MIG torch allowing adjustment of ARC length and Amperage from the torch, It can also be used with a standard MIG torch, and is ready to be connected with push pull torch.
Additional controls included are:
• Digital control of gas flow
• Storing of 6 different “job” working parameters for each program.
• Auxiliary output for tractor carriage and push pull torch.
• VRD Voltage Reduction Device.
please note: (RWS system does not work with electrode negative therefore if you want to weld with gasless wire a voltage sensing wire feeder must be used.)
Part No: KTR350RWS