50500-Plasma-Air-Filter
50500-12 - Sub-Micronic Air Filter
50505-48 - Sub-Micronic Cartridge
50500-Plasma-Air-Filter
50500-12 - Sub-Micronic Air Filter
50505-48 - Sub-Micronic Cartridge

PLASMA AIR FILTER

Available in stock
SKU: 50500-12

Description

‘AT 1000” is the perfect solution to the problems created by the contamination of the compressed air used in many plasma cutting
systems. It eliminates “sputter” caused by moisture and oil from compressed air lines. It extends the electrode and tip life, with
obvious benefits to the cut quality. Designed to remove areosol oil and moisture, the “AT 1000” is a real benefit, entrapping particles as small as .01 microns inches, with the “AT 1000” torches Iast longer. Using a plasma cutter without the “AT 1000” fitted will result in
condensed moisture remaining in the torch and torch head. This moisture can cause a short-circuit, with subsequent costs for the
replacement of the torch head. The ”AT 1000’ can filter up to 1250 Iiters a minute without reduction in pressure. It’s recommended to replace the filter cartridge every 5 to 7 days (max). It’s also very suitable for painters and use of pneumatic tools.

 

 

Quick Overview

Sub-Micronic Compressed Air Filter

SPECIFICATIONS

  • Part No.50500-12 - Sub-Micronic Air Filter
  • Part No.50505-48 - Sub-Micronic Cartridge
  • Filtering Degree01 pinch - 0.25 pm
  • Maximum Pressure125 PSI - 8.5 bar
  • Maximum Flow @ 80%2700 SCFH - 1250|/min
  • Temperature Range:1 5-1 40F / -1 0 +60Co
  • Size Pipe1/4 NPT
  • Dimension132 x 200 mm